RE: loading dock follow-up



We use both dock high and ground level loading at our warehouse. Probably 75% is done as ground level loading/unloading. For this we use fork lifts, or the lift gates of the delivering trucks. Ground level access gives you the greatest flexibility for handling all kinds of deliveries. You can roll items in and out of your facility using dollies, pallet jacks, fork lifts, etc.  You can off-load from the side doors of trailers, or on and off flat bed trucks from the side using a fork lift. Your prep department can make use of the easy access to outdoor areas for painting pedestals, packing crates, and all the messy activities that go into staging an exhibition. Trucks have differing bed heights and loading docks can present obstacles to ease of unloading. If your loading dock is located inside the museum it takes up a lot of space that could be better used for prep operations.  I prefer ground level door access over loading docks. Best regards, Bryan Cooke

 


From: pacinlist-bounces@pacin.org [mailto:pacinlist-bounces@pacin.org] On Behalf Of Jon Pierro
Sent: Monday, September 10, 2007 11:16 AM
To: PACIN ListServ
Subject: RE: loading dock follow-up

 

A dock never “breaks down”, especially when you need it the most!!

 

Jon Pierro  

 

Stebich Ridder International

120 Brighton Road   Unit #1

CliftonNJ  07012

 

Tel:  (973) 594-4950

Fax: (973) 594-1977

 

www.stebichridder.com

 

This message and any attachment are confidential. If you are not the intended recipient, please telephone or email the sender and delete the message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person.


From: pacinlist-bounces@pacin.org [mailto:pacinlist-bounces@pacin.org] On Behalf Of Bob Hellier
Sent: Monday, September 10, 2007 2:11 PM
To: pacinlist@pacin.org
Subject: loading dock follow-up

 

Thank you for your responses to my loading dock declined approach question. To further clarify, the approach would angle down so as to drop about 4 feet vertically over a horizontal distance of 45'. (The building's floor will be at the same elevation as the street, thus the need to bring the truck down)

 

A follow-up question: Would it be better to consider a level approach (no dock in other words) with a large, heavy duty scissors lift at the end onto which crates can be rolled, then lowered to ground level?

 

 

Bob Hellier
Designer/Preparator
Tampa Museum of Art
600 North Ashley Drive
Tampa, Florida 33602
(813) 274-8718
FAX (813) 274-8732
E-mail: bob.hellier@tampagov.net

 

All e-mail communications sent to and from the Tampa Museum of Art are considered public record and are subject to the Public Records Laws of Florida.
 
The Tampa Museum of Art showcases four new exhibitions that feature contemporary crafts, sculpture and photography: "Color: Ten African American Artists," July 21 – September 23, "National Sculpture Society 74th Annual Awards Exhibition," July 21 – September 30, "The Big Picture: 2006 Photographer Laureate Steven S. Gregory," July 28 – September 16, and "American Detritus: Andrew Junge," July 11 – September 16, 2007. For more information, visit www.TampaMuseum.com.



This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.