{Collins} Re: final problem: exciter tuning knob slipping!! HELP

Quick way or long term solution?
Quick way: tighten the set screw on the back of the tuning bar.
re-tighten periodically.

Long term: Remove the tuning unit and disassemble.  Watch for ball
Clean and degrease.
Lubricate bearings, slides and rollers with white lithium grease.  Dust the
slugs with a little talcum powder.
Enjoy smooth, trouble free tuning that feels like it just left the factory.


> well, got the 32S3 RE aligned, finally!  Cockpit problem.  But have a
> squeeky exciter knob PLUS it slips!!  Any suggestions please.  Tnx.  Van,
> K7VS

Sponsored by the Collins Collectors Association http://www.collinsradio.org
Nets: Tues: 3.805 Mc-2000 Central / Thur: 3.875 Mc-2000 Central
Fri: 3.895 Mc-2000 Pacific / Sun: 14.263 Mc-2000 UTC
1st Wed (of the month) AM Net 3.880 Mc-2000 local (ET, CT, MT, PT)
Sun AM Net: 29.050 Mc-1200 Central

This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.