{Collins} Re: Heath Power supply



Just caught a mistake, the KWM-2 needs 11 amps at 6.3 VAC, not 12 V.
The 3 amp draw at 24 V is correct, so the extra transformer need only be 
rated at 3 amps.

Sorry, Chas


----- Original Message ----- 
From: "Charlie" <pincon@xxxxxxxxx>
To: <collins@xxxxxxxxxxxxx>
Sent: Tuesday, August 08, 2006 1:36 PM
Subject: {Collins} Re: Heath Power supply


> Wire a 12VAC at 3 amp filament transformer in series with the existing 12 
> V
> output from the Heath supply and wire the KWM-2 plug for 24 V filament
> operation.   I mounted the transformer under the Heath power supply 
> chassis
> by moving a couple components to make room.  That way you don't overload 
> the
> heath filament output which is rated for around 8 amps.  (The KWM-3 needs 
> 11
> amps at 12 V but less than 3 ant 24 V.)
>
> 73 Charlie k3ICH
>
> 
Sponsored by the Collins Collectors Association http://www.collinsradio.org
Nets: Tues: 3.805 Mc-2000 Central / Thur: 3.875 Mc-2000 Central
Fri: 3.895 Mc-2000 Pacific / Sun: 14.263 Mc-2000 UTC
1st Wed (of the month) AM Net 3.880 Mc-2000 local (ET, CT, MT, PT)
Sun AM Net: 29.050 Mc-1200 Central






This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.