Re: {Collins} 75A PTO Knob Removal



I think you mean "Torx".

Torx drive is NOT compatible with a Bristol drive. Same is true for a standard hex drive. It may work....once.

I'd also bet you have succeeded in destroying the splines in the Bristol set screw such that at some later date, if there's an attempt to use proper Bristol wrench, it won't work.

At this point, you best bet is to replace the set screw with either the proper Bristol version, or, use a more common hex drive set screw. The various threads ARE compatible, but the drives are not.

73' Chas


----- Original Message ----- From: "Bill & Becky Marvin" <wmarvin@xxxxxxxxxxxxxxx>
To: <collins@xxxxxxxxxxxxx>
Sent: Friday, February 19, 2010 11:09 PM
Subject: {Collins} 75A PTO Knob Removal


Hi Group Thanks for the info. As it turns out a Torix #6 fit the bill........... $3.38 at Home D.

Again Thank you!

73

Bill BB9IV
_______________________________________________
SHARE THE FUN: JOIN THE COLLINS COLLECTORS ASSOCIATION TODAY !
http://www.collinsradio.org/membership/

NETS: Tues & Thur: 3.805 MHz-2000 Central + Fri: 3.895 MHz-2000 Pacific
 SUNDAYS: 14.263 MHz-2000 UTC  +  AM Net: 29.050 MHz-1200 Central
 1st Wednesday AM Net 3.880 MHz-2000 local (ET, CT, MT, PT)

LIST HELP?  ADMIN EMAIL:  collins-owner@xxxxxxxxxxxxx
This ONLY goes to the list admins and does not post to the group!







This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.