Re: {Collins} 75S-3C Meter Lamp Replacement

Pull it out...

Use a small screwdriver gently around the edge if you need to break it
loose.   It's a push fit.

Ian, K6SDE

>-----Original Message-----
>From: Paul Christensen [mailto:w9ac@xxxxxxxx]
>Sent: Wednesday, July 13, 2011 10:51 AM
>To: 'collins'
>Subject: {Collins} 75S-3C Meter Lamp Replacement
>I can't believe I'm even asking this...
>I've looked through the 75S-3C manual concerning *meter* lamp replacement
>the #47 bulb.  The manual discusses *dial* lamp replacement (easy enough)
>but not the meter lamp which is strangely missing.  So that I don't cause
>damage in trying to figure out how the lamp extracts from the meter body, I
>would like feedback on how it's done.

This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.