Re: {Collins} Needed



Haven't tried it but someone recommended to heat a non-stainless steel screw
red hot to anneal it some and then after cooling it down use 'gun blue"
which will actually turn it a nice back oxide color.

73 Jerry
K1JOS

-----Original Message-----
From: Glen Zook [mailto:gzook@xxxxxxxxx] 
Sent: Thursday, June 16, 2011 12:02 PM
To: COLLINS@xxxxxxxxxxxxx; Bill Carns
Subject: Re: {Collins} Needed

Some very well stocked hardware stores have at least a #5 machine screw.
Not Home Depot, Lowe's, etc.  If you can't find a black oxide one, often if
you heat the machine screw with a propane torch it will turn black.

Glen, K9STH

Website:  http://k9sth.com


--- On Thu, 6/16/11, Bill Carns <wcarns@xxxxxxxxxxxxx> wrote:

Looking for a strange screw. Does anyone out there have a #5 round head
slotted x 5/8 inch instrument screw black oxide style. Just need one and
yes, I am going to check McMaster Carr.  But for one, I thought I would try
you guys.
_______________________________________________
SHARE THE FUN: JOIN THE COLLINS COLLECTORS ASSOCIATION TODAY !
http://www.collinsradio.org/membership/

 NETS: Tues & Thur: 3.805 MHz-2000 Central + Fri: 3.895 MHz-2000 Pacific
  SUNDAYS: 14.263 MHz-2000 UTC  +  AM Net: 29.050 MHz-1200 Central
  1st Wednesday AM Net 3.880 MHz-2000 local (ET, CT, MT, PT)

The Collins Reflector reserves the right to refuse access to anyone.

LIST HELP?  ADMIN EMAIL:  collins-owner@xxxxxxxxxxxxx
This ONLY goes to the list admins and does not post to the group!







This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.