{Collins} How to fix sticky S meter?



Happy Holidays to everyone here.
 
The S meter on my 51J2, which is an old S Line S meter,  just started  
sticking at the low end of its movement. 
 
A slight tap on the glass usually frees it, and if I turn the  mechanical 
stop all the way to the right, letting the needle rest well above  zero, it 
works ok.  But it's making me nuts.
 
As I haven't had an analogue meter apart lately, I thought before I did  
anything heroic  I'd check for good advice, lest working right become the  
enemy of working ok.
 
Thanks, Scott


This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.