Re: {Collins} Crystal Pin Size/Sleeve

If you really want an adapter, they have been made..... I have seen and used what looks like an 'abbreviated FT-243" device where the crystal pins, FT243 size, project from a tan plastic/micalex that looks much like a FT243 crystal package that has been hack sawed off to about 1/4 inch above the pins.

On the side opposite the FT243 pins, you will see the pin sockets suitable for plugging in your HC/9 crystal.

No, I don't have any anymore.... you may find them attached to an HC/9 crystal in bags and boxes of surplus crystals... if so, grab them. Not a homebrew product. Good luck. Probably not much market for them these days.


On 5/30/2015 11:46 AM, bfetters--- via Collins wrote:

Thanks.   That works for me.


Sent from AOL Mobile Mail
Get the new AOL app:

On Saturday, May 30, 2015 Garey Barrell <k4oah@xxxxxxxxxxxxxx> wrote:
Buck - We always just used pins scavenged from dead octal tubes! You can purchase 0.125" o.d. brass tubing from a hobby/model shop... Hobby Lobby, etc. 73, Garey - K4OAH Rome, GA Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs <> bfetters--- via Collins wrote: > Is there a "sleeve" or larger pin that fits over the S-line (HC6/U) Collins crystal pins that enlarges them to a .125 size that permits usage in other sockets similar to the old FT-243 crystals? If so, does anyone have some for sale? > > > Thanks. > > > Buck > W0LC > >
*** You are subscribed to Collins as jaduffield@xxxxxxxxxx. If you wish to unsubscribe, or modify your preferences please visit ***

This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.