{Collins} Tough problem in 32S3 ALC semi-fixed

To all of you who helped with my “tough prolem in 32S3 ALC”, wanted to let you know that I semi-fixed it.
I say “semi” because while it works, it is not satisfying.

I replaced every part in the ALC circuit including V6 (it is NEVER the tube).
I found that something past the ALC rectifiers was loading the ALC circuit.  
I seemed to isolate it to the part of the circuit that drives pin 1 of V6 through a 10K resistor R105.  When I lifted R105 from the ALC line, ALC was restored, not as much as in my winged 32S3, but enough so it worked OK.

I could not find anything in the grid circuit/tuned circuit that was causing the loading.  no shorts, opens, etc.  all voltages normal.  There isn’t much there.
10K in a grid circuit is a very low value unless collins was trying to kill two birds by using it to drastically lower the Q of the tuned circuit.
SO I replaced the 10K with a 470K.   I didn’t notice any difference in tuning, but this let the ALC work and deliver ALC voltage to V6 and V3.

I am tired of working on it so this will have to do for now.

Thanks all who helped.
73, Grayson KJ7UM

This archive was generated by a fusion of Pipermail (Mailman edition) and MHonArc.